List of 1911 Manufacturers, current and former - Page 5 - 1911Forum
1911Forum
Advertise Here
Forum   Reviews   Rules   Legal   Site Supporters & Donations   Advertise


Go Back   1911Forum > >

Notices


Reply
 
Thread Tools Display Modes
  #101  
Old 10-24-2015, 06:22 AM
AMSny AMSny is offline
Junior Member
 
Join Date: Aug 2015
Posts: 42
1911 manufactures

Oriskany Arms
Reply With Quote
  #102  
Old 10-24-2015, 02:32 PM
dsk's Avatar
dsk dsk is offline
Administrator
 
Join Date: Sep 2000
Posts: 58,478
Added, thanks.
__________________
Avoid the temptation to replace everything on your brand-new 1911 just to make it "better". Know what you're changing out and why. You may spend a lot of money fixing things that weren't broken to begin with. Shoot at least 500 rounds through it first, then decide what you don't like and want to improve. Regarding vintage 1911s, pre-1946 pistols are highly collectible in original, unaltered condition and should NEVER be refinished or modified as it completely ruins their monetary value.
Reply With Quote
  #103  
Old 10-29-2015, 09:35 AM
racoonbeast60 racoonbeast60 is offline
Member
 
Join Date: Aug 2013
Location: Central Florida
Posts: 475
I owned a Michigan Armory 1911 clone in the eighties. They were a small company who popped up, ran a while, and disappeared during that decade. How about them?
Reply With Quote
 
  #104  
Old 10-30-2015, 09:49 PM
PARA_SHOOTER PARA_SHOOTER is offline
Junior Member
 
Join Date: Jan 2013
Posts: 17
does anyone know what is going on with para's website?
Reply With Quote
  #105  
Old 10-31-2015, 01:34 AM
AmericanPride! AmericanPride! is offline
Member
 
Join Date: Dec 2013
Posts: 682
Quote:
Originally Posted by PARA_SHOOTER View Post
does anyone know what is going on with para's website?
Haven't looked in awhile, but Para is no more. They've been bought out/absorbed by Remington. The scuttlebutt is they will make some guns (including double stacks) modeled after Para guns
Reply With Quote
  #106  
Old 11-04-2015, 06:51 PM
Audioi Audioi is offline
Member
 
Join Date: Nov 2014
Posts: 68
Quote:
Originally Posted by AmericanPride! View Post
Haven't looked in awhile, but Para is no more. They've been bought out/absorbed by Remington. The scuttlebutt is they will make some guns (including double stacks) modeled after Para guns
Too bad.
Reply With Quote
  #107  
Old 11-04-2015, 06:59 PM
Pro Street Pro Street is offline
Member
 
Join Date: Dec 2012
Location: Texas
Age: 63
Posts: 745
http://www.republicforge.com/
Republic Forge in Perryton Texas
__________________
Go Pokes!
Reply With Quote
  #108  
Old 11-14-2015, 06:14 PM
oldman45 oldman45 is offline
Senior Member
 
Join Date: Apr 2010
Location: Louisiana
Posts: 2,253
There is a firm in Louisiana making some of the best 1911 sidearms that money can buy.

It was founded by Jim Clark and now ran by his son Jimbo.
__________________
Remember, a 9mm round might expand but a .45acp round never shrinks
Reply With Quote
  #109  
Old 09-28-2016, 04:42 PM
mmoseley mmoseley is offline
Junior Member
 
Join Date: Sep 2016
Posts: 5
Now, for a real 1911, call Terry Tussy or
CT Brian,
Reply With Quote
  #110  
Old 09-30-2016, 09:42 AM
mmoseley mmoseley is offline
Junior Member
 
Join Date: Sep 2016
Posts: 5
1911

A real 1911 is as follows. Tussy Custom
CT Brian Custom.
Reply With Quote
  #111  
Old 11-08-2016, 08:21 AM
Model3SW Model3SW is offline
Junior Member
 
Join Date: Jan 2009
Location: South Florida
Posts: 23
Up until about 20 years ago the average 1911 were much more affordable to people with median income, both new and used. Now few companies make a nice, solid 1911 at a reasonable price. Then Norinco imported economy 1911s which, till this day, I have not tried. I think it was going for a whopping $300 back then. I'm of the mind if it isn't made in the USA (with very few exceptions) it CAN'T really be a 1911.

The basic 1911 design has been revised over the past 105 years but it's still a 1911. It is like the saying that if you build a better mousetrap the world will beat a path to your door.

Well, mouse traps aside, the 1911 is one of the true crowning glories that still exist in American handgun sport in addition to its Military records. d

As I've been advised, Randall was the first to manufacture a 1911 in Stainless Steel. Randall was also the first (and I think only) company to manufacture a Left Handed 1911. NOW ... that is a trip ! I'd like to have a matched right and left handed Randall 1911. It is a TRUE left handed 1911. Ejection port on the left, taking a left handed magazine. GO LOOK IT UP !!

Randall is no longer in business. I first found the Randall passing one at a LGS over 25 years ago thinking Randall knives, but it is not that same Randall.

A close friend and range buddy purchased a Para 1911 about 5 years ago from our LGS, new in the box $500 out the door, tax included. It is the black, no frills, fixed sight model.

I've fired it several times. I have to say it functions flawlessly. The LGS stated that the Para is no longer Para-Ordnance but just Para ... a different company. Either way, it IS a nice, tight, reliable 1911.

Having shot a Para-Ordnance P13-45 which was the cutting edge of compact 1911 high capacity at the that time. Then Detonics were all the range for awhile, Colt Commanders, 1911 double action conversions.

At the shot show of 2009 in Orlando 2009, after not attending a Shot Show for several years I was amazed at all the 1911s being manufactured by companies that NEVER manufactured 1911s.

As I walk through the show, I see the custom builders of 1911s and the higher end and custom 1911s racers. That was not unusual. Being a kid in a candy store, a normal red blooded American ... especially baby boomer that have more cash in their collective pockets than common sense ... want one !

Then I find S&W display of 1911s and ARs. Further through the show, Ruger, Sig-Sauer and about a dozen other companies that never before made 1911s are now producing 1911s.

I figured then and there, the 1911 is going to be around for ANOTHER 100 years.

Here is a short list of companies that have, had or still do manufacture 1911s as of 2010. I'm sure the list is much longer now.

See here: List of 1911 Manufacturers, current and former - 1911Forum

You would reason ... that by the sheer volume of 1911s alone ... and 1911 parts manufactured (which has to be in the several millions by now) that the prices of new and even more so of used 1911s, would be much more reasonable but NO, they're still going hot and heavy with no end in sight. About 20 years ago, a GI WWII 1911 would cost you about $200.00. Some with the uS Property ground out (GI bring backs) and re-framed Ajax 1911 with all the GI colt parts, would go even cheaper.

Very few collectors realize and even less are still here to attest that the 1911 was notoriously inaccurate but it was reliable. A few pioneers in American firearms improvements was John Giles and Clark. The tow factions still argue who was the first to accurize a 1911 Colt. I prefer to believe it was John Giles who first started tinkering with 1911s in the early 1940s. After WWII he made a living of it and other gunsmith customization but he tended to prefer automotive pistols with the 1911 his main focus.

Over the past 20 years there has been much collecting interest in older, factory Colt 1911s and of accurized 1911s such as Giles, Clark and others. Here in Florida, John Giles (RIP) was (and still is) our local George Washington in a sense. He's the father of the accurized 1911s and his shop was in Odessa, FL.

The first Giles I ever purchased was about 25 years ago for $500 with a broken hammer spur. (it still has that broken hammer spur). A good cleaning and hand loads to Giles load specs, this old, "well used and well shot" Giles .45 bullseye gun was on the mark.

Apparently it had gone through a few owners that did not know what it was nor the proper ammo to feed it, as was designed to shoot. Likely a few hundred rounds of factory pack .45 ACP slapping that light springed slide back to full extent, beat up that hammer so bad it finally broke. John Giles lightened the Colt hammers by thinning the surface / striking area, then between the hammer spur and the body, trimmed out more metal that at top view (looking at ti from the top down) it had a " I " shape to it, a shape similar to looking at the end of a Steel I beam.

John Giles held many patents for devices, tools, sights, gauges, etc. however he never patented the on piece sight rail that is his signature identifiable piece on most of his guns. The same rail that Bomar copied and made famous. He manufactured his sights from scratch.

I'm currently seeking his earlier work whether Colt 1911s, early 1950s Ruger .22s and a variety of High Standard models. Whether they have 2 separate sights or the RAIL system.
I have one that dates back to 1947 that has 2 separate sights (not the rail).

I have made contact with some of the remaining Giles shooters that are getting up there in age now and keep in contact with some of us YOUNGER guys (50 to 70 years old) that admire and collect his work.

Anyone having info or old Giles anything, including any target pistols and / or catalogs, paperwork etc, please contact me via the eMail selection on my profile page. I welcome speaking with bullseye collectors and Giles and / or Clark owners. Sal Raimondi, www.aafsa.com
__________________
__________________
"when guns are outlawed then only outlaws will have guns".

Last edited by Model3SW; 11-08-2016 at 08:22 AM. Reason: spelling
Reply With Quote
  #112  
Old 02-05-2017, 01:47 PM
chris browne chris browne is offline
Junior Member
 
Join Date: Feb 2017
Posts: 6
E M C Santa Ana, Ca

Hello, I am a new member to this forum, I ended up here after the only online info on an E M C 1911 .45 referred me to a 2009 reference to this pistol in a posting here. I actually have one of these pistols in my possession. The frame is marked E M C Santa Ana, Ca. Serial number 40xx. Slide is unmarked. Pistol is tight and well made, exceptionally sweet trigger. I have been a 1911 guy for 40 years, and an ffl for twenty years, but I have never seen or heard of this Mfg. I would appreciate any information. I was told at one point ( second hand} that it was used in Vietnam by special force operator.
Thanks for listening, Chris Browne
Reply With Quote
  #113  
Old 03-26-2017, 11:09 AM
Pappy1949 Pappy1949 is offline
Member
 
Join Date: Mar 2017
Location: Texas Hill Country
Age: 68
Posts: 80
New member here. Scanned through the posts and didn't see Kahr Arms/Auto Ordnance mentioned.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:10 AM.


NOTICE TO USERS OF THIS SITE: By continuing to use this site, you certify that you have read and agree to abide by the Legal Terms of Use. All information, data, text or other materials ("Content") posted to this site by any users are the sole responsibility of those users. 1911Forum does not guarantee the accuracy, integrity, or quality of such Content.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 2015 1911Forum.com, LLC. All Rights Reserved