1911Forum - View Single Post - Anyone have primer feed trouble with 550B?
View Single Post
  #6  
Old 12-24-2006, 12:17 PM
Ares45 Ares45 is offline
 
Join Date: Apr 2005
Posts: 125
I've found that if you over tighten the two bolts holding the primer feed assy to the press it can cause the primer bar to stick. Try backing off the bolts a half turn or so and letting the primer assy float a LITTLE bit.

Between regular cleaning w/ alcohol, a little graphite powder, and freeing up the primer assy my 550primer system runs smoothly about 99.8% of the time.
Reply With Quote