1911Forum

1911Forum (https://forums.1911forum.com/index.php)
-   Ruger (https://forums.1911forum.com/forumdisplay.php?f=74)
-   -   LCP repair+ (https://forums.1911forum.com/showthread.php?t=995622)

Benchloader 07-12-2019 03:52 PM

LCP repair+
 
Recently at the range I saw the Takedown Pin in my LCP coming out. Pushed it back in and fired a round. Takedown Pin came out, slide flew off and landed about 5 feet in front of me with a new round under the extractor. I found all the parts except the Outer Recoil Spring. Ruger gave me a RMA # and shipping label.

The LCP came back with a slip showing what they did. Replaced the Barrel, Extractor, Takedown Pin, Takedown Detent, Guide Rod, Inner & Outer Recoil Springs. 24 rounds fired without malfunction.

Way more than I expected. I certainly appreciate the attention Ruger gave to my LCP.

1911-USMC 07-13-2019 08:48 PM

Quote:

Originally Posted by Benchloader (Post 12881648)
Recently at the range I saw the Takedown Pin in my LCP coming out. Pushed it back in and fired a round. Takedown Pin came out, slide flew off and landed about 5 feet in front of me with a new round under the extractor. I found all the parts except the Outer Recoil Spring. Ruger gave me a RMA # and shipping label.

The LCP came back with a slip showing what they did. Replaced the Barrel, Extractor, Takedown Pin, Takedown Detent, Guide Rod, Inner & Outer Recoil Springs. 24 rounds fired without malfunction.

Way more than I expected. I certainly appreciate the attention Ruger gave to my LCP.

Wow, never seen that one before. I had two LCP I's for a few years, shot them quite a bit actually, and never had an issue.

I traded both of them off on two LCP II's, and so far, they have ran pretty good as well...about 200 rounds through each of them.

Sounds like Ruger pretty much rebuilt your LCP. Is yours the first gen or second? :confused:

scubadad 07-13-2019 08:57 PM

Ruger has great customer service. That is why I have a bunch of them

Benchloader 07-14-2019 09:20 AM

Quote:

Originally Posted by 1911-USMC (Post 12882436)
Is yours the first gen or second? :confused:

Labeled/Marked LCP, purchased new June 2013 from the PX. Just under 2000 rounds when Takedown Pin problem occurred.

Dddrees 07-14-2019 09:25 AM

Quote:

Originally Posted by scubadad (Post 12882452)
Ruger has great customer service. That is why I have a bunch of them


Certainly a factor for me as well although I've never had to use their customer support.

mr380acp 07-17-2019 11:58 AM

Good to Know !


All times are GMT -5. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2015 1911Forum.com, LLC. All Rights Reserved