PT1911 Makeover

[lamb]

Finally finished with the customization of my PT1911. Here's the specs:

Taurus Slide - Hi-Power Cut front of the slide to remove the FCS, serrated the top of the slide 20LPI, French Border, Carry Melt, Re-Cut Rear Cocking Serrations to 20LPI

Taurus Frame - Undercut Trigger Guard, Re-Pointed Checkering, Carry Melt, 45 Degress Bevel Slide Stop, Tig'd and Re-Blended Beavertail Tangs.

Taurus Grip Safety - Re-Blended and Serrated Bump

Wilson Combat Match Barrel (45 Degree Reverse Crown), Wilson Barrel Bushing, Wilson Spring Plug, Wilson Slide Stop (Flush Cut and Beveled), Wilson Extended Ejector, Wilson Extractor, Wilson Hammer/Sear/S.Spring/Discon., Wilson Grip Screws, Ed Brown Barrel Link, Ed Brown MSH w/ Magwell, Ed Brown Pins and Plungers, Ed Brown Mag Catch, Cylinder and Slide Match Trigger, EGW HD Thumb Safety, Heinie Straight Eight Nightsights, JD Series 80 to 70 Shim, Wolff Springs, Black Box Elder Burl Window Grips, Duracoat Matte Black.

Wilson Parts were 'Bulletproof' unless the part didn't come in the 'Bulletproof' lineup - all the usual work (polishing, fitting, ect.) was done and the gun runs like a champ.

Pics (cell phone because I don't own a decent camera):

[silversport]

nice work...thanks for sharing...

Bill

[twitchn1911]

it looks good, nice work.