Show us your Favorite Para.

[Haydukelives]

My GI Expert received in a trade. Excellent pistol so far!

[Runt7680]

http://m1090.photobucket.com/albumvi...57105.jpg.html
http://emob1090.photobucket.com/albu...g?t=1333056985
http://emob1090.photobucket.com/albu...g?t=1333057022
http://emob1090.photobucket.com/albu...g?t=1333061270

[brbarrett]

My Para PDA with Ivory grips

[Largejake]

My GI Expert. Rasco grips, Wilson drop in beavertail and Clipdraw on right side. I need a better camera.

[mikenacarato]

here is my Para Ordnance. One shot with Uselton's grips and the other with some custom koa wood grips.

[R. Deschain]

Modified Black Watch

[MW surveyor]

My GI Expert with leopard wood grips and Wilson "clip on" mag well.

[baggersport]

New to me...P13-45 steel frame from the original owner. Haven't called on the date of manufacture yet, he thought '94-'95 and I have a Para flyer that came with it dated '95. Got 4 PO hi-cap mags, 1 PO 10 round and 1 10 round no name. Low miles on everything. Gun was 'smithed by Jim Rose....Clark bbl, NM bushing, checkered front, 2.5lb trigger Won't have a chance to test it for a week or so....can't wait.

...had to give 700.00 for it, don't think I got hurt....

[garysy]

My new Slim Hawg, shes back at the factory right now, excessive frame wear, they want to look at, and will most likely replace. its my everyday cc, and an excelent shooter.

[MohawkActual]

Here's my GI LTC

[Seraphim38]

I just got this yesterday and am very excited about it. It's all about getting the job done...






From what I can tell it has
(I would be very grateful for any comments from someone who knows more about Paras since I don' know what is stock and what is aftermarket)

Para Ordnance P14-45 with 2 factory mags, P206XXX serial number, made in Canada circa ~ 2010
Para Ordnance Match barrel
Match trigger (STI or factory?)
Extended thumb safety (Wilson Combat or stock?)
Skeletonized hammer (anyone recognize this one? is it stock?)
3 dot sights (anybody know what these are?)
There are vertical slits on the front of the frame/handle that I have seen on some old pictures but not on all. I am guessing this was done from the factory
Maybe an Smith & Alexander flat checkered mainspring housing? I don't know what the stock one looks like, but this one may be stock.

Now I am looking for a shoulder rig, IWB holster, Dawson Precision aluminum base pads & springs, good ammo. I will probably install a Wilson slide release first.

[nailer556]

Here's my GI Expert. It's a little rough, it's my daily carry gun. I like Blackhawk's stuff but their serpa holsters are hell on a pistols finish.

[blackdout1911]

Was the beaver tail hard to install and will any peaver tail fit or does it have to be specific wilson or para

[Seraphim38]

blackdout1911, who are you asking? My beavertail came with it. My belief is that muy gun was a configuration that pre-dated the 'P14 Limited' version', which comes with the match barrell, beavertail, 3 dot sights and STI trigger. While I don't have absolute confirmation, I believe that my P14 is actually factory stock.

For P14s I have heard that the Wilson .220 beavertail can be dropped in but that no beavertail fits perfectly without some level of machining. The right way I have heard is to hire a gunsmith to install a .250 version.

[MOUNTAIN WILLIAM]

I put together a model that Para just never got around to making, a Commander size Hi cap. I fitted a P13 top end onto a P14 lower for a sweet carry piece.

[uponthestair]

What did you do with the frame from the P13-45 and the slide from the P14-45?

Long slide P13?

Originally Posted by MOUNTAIN WILLIAM

I put together a model that Para just never got around to making, a Commander size Hi cap. I fitted a P13 top end onto a P14 lower for a sweet carry piece.

[MOUNTAIN WILLIAM]

I was going to part the left overs out but I ran into a guy that had a bunch of P13 mags and he bought it all. Apparently he was going to use a reverse plug to cover the gap in between the dust cover and the slide. I never did see his completed project.

The P13 grip was just a tad too short for me, I even tried an S&A magwell guide.

[stewj21]

Before and after pics of my GI LTC with factory and VZ Alien Black Desert Sand grips...

[Bagdad_45]

Here is a picture of my two mid-90's P14-45. Been shooting them in USPSA since then. One has a Dawson FO front sight.

DSCN0931.jpg

[Bluegrass1911]

Here is mine that I picked up yesterday.[IMG]desmond.imageshack.us/Himg819/scaled.php?server=819&filename+009ozk.jpg&res=land ing[/IMG]

[Bluegrass1911]

Try again...Here is mine that I picked up yesterday.

[DM-SC]

[DM-SC]

[garysy]

Noah built with God's direction and design, and he is a pro.

[Camo Charlie]

My Warthog.



Uploaded with ImageShack.us