Sig Sauer 1911 holster thread for Sig Sauer slide profile guns.

[dmdmx2]

Hi everyone, go to http://www.usgalco.com I looked and they offer at least 19 different holsters for the Sig 1911 including the Quick Slide belt holster that I use to carry my Sig 1911 Ultra Compact. They also offer purses and other means of concealment as well. If you want some excellent quality products look at Galco's offerings. I use them to carry all 3 of my concealment guns!

[MOUNTAIN WILLIAM]

Back when I go my first SIG 1911 Carry model with rail no one made any holsters for it, luckily I got Kramer to make one out of horsehide for me. They had to make two because they made the first one incorrectly. It's a standard item now.
http://www.kramerleather.com/product...&categoryID=24

I also had Alessi Holsters make a DOJ Open Port to fit my gun. I like the lowered and reinforced mouth of the holster, it's very quick to clear leather.
http://shop.alessigunholsters.com/It...20Sauer%20Guns

Both holsters have a vertical draw and are well made, I'd recommend either one.

[slow92]

I got my holster from PHLster.com and it is great. It is for my tacops with tlr1s with 15 degree cant. Great fitment and awesome holster. Sorry for the cellphone pics.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[custom2]

Originally Posted by MOUNTAIN WILLIAM

Back when I go my first SIG 1911 Carry model with rail no one made any holsters for it, luckily I got Kramer to make one out of horsehide for me. They had to make two because they made the first one incorrectly. It's a standard item now.
http://www.kramerleather.com/product...&categoryID=24

I also had Alessi Holsters make a DOJ Open Port to fit my gun. I like the lowered and reinforced mouth of the holster, it's very quick to clear leather.
http://shop.alessigunholsters.com/It...20Sauer%20Guns

Both holsters have a vertical draw and are well made, I'd recommend either one.

Kramer made a holster for a gun I built from a picture I sent them. The frame had a squared off dust cover so it wasn't too difficult but I was impressed with the finished product they made from a picture.

[Big Nugget]

http://www.winthropholsterstore.com/servlet/StoreFront

https://www.facebook.com/#!/pages/Wi...10963022292319

Nitron rail gov

[sigsnjeeps]

I have a Nitron W/O rail, I bought a Blackhawk 'CQC' IWB leather holster w/ clip size 01 for 1911/clones, took a little work and a brief break-in period. Now it works fantastic.

http://www.blackhawk.com/product/Ins...,1517,1418.htm

I like this IWB with all that extra leather as opposed to the Galco Royal Guard I used with my Springfield, less skin contact (sweat) and it doesn't eat a whole in my pants!

[gtbigup01]

Originally Posted by innovator

Don't forget about S&S holsters. Great products!

http://ssholsters.com/S%26S_Holsters/HOMEPAGE.html

Agreed, just got mine 2 days ago and it fits like a glove and the cant is perfect for me. Great holster. Will see how it holds up, but it's leather so what could go wrong? LOL

[CoolBreeze1911]

Picked up a BLACKHAWK CQC Holster yesterday. On the package it says all 1911 clones, with and w/out rail. I figured I would give it a shot. My TacOps fits nice, a bit snug, but I keep the gun coated in oil, so I'm not concerned. All in all a good purchase, I had been wanting a paddle holster for around the house and at the range and the BLACKHAWK fits the bill.

[cwo4uscgret]

This is Bianchi's "CarryLok" that has a lock that holds the trigger guard until the finger button is depressed.

I use it for all my 1911s; I had to work the full sized Sig GSR in and out for a while but the holster works very well with the railed gun - without a light or laser attached obviously.

[SmurfHunter]

Originally Posted by CoolBreeze1911

Picked up a BLACKHAWK CQC Holster yesterday. On the package it says all 1911 clones, with and w/out rail. I figured I would give it a shot. My TacOps fits nice, a bit snug, but I keep the gun coated in oil, so I'm not concerned. All in all a good purchase, I had been wanting a paddle holster for around the house and at the range and the BLACKHAWK fits the bill.

What's the part #?

[CoolBreeze1911]

Originally Posted by SmurfHunter

What's the part #?

I'm not sure where I would find that? I threw the packaging out immediately. I'll check the actual holster and post here when I can. If it helps, it's the one with the button on the outside you push to release the gun. It's great as it puts the index finger right above the trigger guard on the frame ready to go once it clears the holster, if that makes sense.

[twitchn1911]

Originally Posted by SmurfHunter

I have crossbreed super tuck for my railed sigs.

http://crossbreedholsters.com/

On a side note I need a paddle holster for bs use. Does the serpa work?

Yes a Serpa for 1911 works just fine, it just rides the corners of the slide.

[twitchn1911]

Kelly gunleather also makes holsters for Sig profile 1911's. I got one in tan horsehide and it fits great.

[Constantine]

Hey! So does Comp Tac

http://www.comp-tac.com/product_info.php?products_id=68


Make sure to hit the barrel length w/ raised flat top option under the drop down menu in the "model" section

[dgludwig]

I'm looking for a quality leather (preferably lined) owb holster for my SIG non-railed but "propriety radiused" slide (the Model TTT, to be specific). I also require a thumb-break retention strap that fits in-between the cocked hammer and the slide. Can any body recommend a holster configured this way? Thanks.

[scubadad]

Originally Posted by scubadad

i have the n3 by galco. not very happy with it. only one belt loop and the weight of a full size 1911 not a good combo. they list it as a being for the sig w/rail but the label on the box shows it being a multi fit. when i ordered direct from galco i told them it was for a scorpion w/rail.

i will say that it is a well made holster typical of galco quality.

still shopping

my first impression on the n3 was less than favorable. now that i spent some time with it and got it broken in i am starting to like it. the single belt loop allows it to move with you. before it was broken in i cursed the single loop as it would pull the holster up with the gun. a new thick heavy duty belt also helped.

[GraphiksInk]

Will these work with the Nightmare also?? Th comp-tac and serpa both don't fit it. I managed to dremel my way for a fir with the serpa but no way with the crossbreed. I have one on order from DMBullard.com so I am anxiously awaiting that to try.

[GraphiksInk]

Originally Posted by Lay/\Low

I wish Blackhawk would make a Serpa CQC holster for the Sig Sauer Scorpion 1911.Some say the Serpa holster made for the Colt 1911 & Clones with or without rails works but I dont want a crappy fit.
I called Blackhawk today and ask them and they could not recommend me a Serpa CQC holster for my Sig Scorpion 1911 and no plans to make one.Odd.
I have a Serpa CQC for my XD40sc and its perfect,love the holster.

I shaved mine down inside and it works fine now with my Nightmare

[High Caliber]

Originally Posted by Constantine

Hey! So does Comp Tac

http://www.comp-tac.com/product_info.php?products_id=68


Make sure to hit the barrel length w/ raised flat top option under the drop down menu in the "model" section

Being that I have a Comp-Tac holster already it would be great to just swap out the kydex bodies. So I called last week to inquire about this and the rep that I spoke with told me they DO NOT make a holster or kydex body for the Sig slide profile and the bodies for the other models would not have a good fit.

[SmurfHunter]

Originally Posted by GraphiksInk

Will these work with the Nightmare also?? Th comp-tac and serpa both don't fit it. I managed to dremel my way for a fir with the serpa but no way with the crossbreed. I have one on order from DMBullard.com so I am anxiously awaiting that to try.

What crossbreed?mmy supertuck fits perfect

[GraphiksInk]

Super tuck also, does not fit the nightmare at all. Way tight and won't go in even half the way.

[SmurfHunter]

Originally Posted by GraphiksInk

Super tuck also, does not fit the nightmare at all. Way tight and won't go in even half the way.

Then you have the wrong hostler. The nightmare is no different then any other sig 1911. Only the grip end is different which has nothing to do with the holster. It should fit or your have the wrong holster.

[dayphotog]

I have the galco kink tuk for the standard 5" 1911 and it fits my standard 5" 3.5"
and also my

Scorpion carry and super carry which really surprised me

[ronogg]

This is a Ritchie Leather Hideaway. I use it every day. I highly recommend this holster.
http://www.lightningarms.com/images/...eout_sigbk.htm
http://www.lightningarms.com/products.htm

this is a link to a man here in Oregon that has them in stock so you dont have to wait to have one made.
Just order one for a 3" 1911 and it will work great. I was able to try out the DeLfati and a Milt Sparks. both of these were a bit tight for the slide on the sig.

HTH Ron

http://www.lightningarms.com/products.htm

[dayphotog]

ok my standard galco king tuk fits all!
model
B129HO
KT212B

with standard 1911 5"


with sig carry scorpion


with 1911 officers 3.5"


and sig 1911 ultra carry