Ejector pin

[billres]

Started cleaning my new Compact after two hundred rounds
and the ejector pin was broken . I had noticed on initial cleaning
that the pin was two small for the hole , kept sliding in and out.
Ordered a new pin to install , are the pins a standard size ?
Hope the durn hole is not drilled too large.

Thanks for help

Love the gun

Bill

[Cappi]

I believe the pin is 1/16"

..L.T.A.

[NIGHT AL]

Originally Posted by billres

Started cleaning my new Compact after two hundred rounds
and the ejector pin was broken . I had noticed on initial cleaning
that the pin was two small for the hole , kept sliding in and out.
Ordered a new pin to install , are the pins a standard size ?
Hope the durn hole is not drilled too large.

Thanks for help

Love the gun

Bill

The pin is broken into, Two pieces? as Cappi stated it should be 1/16th
if it fits loose just put some Blue LOC TITE on it just one small drop, that should hold it. let it set for a few hours. if you ever need to get it out, just heat it a little, and drive it out.....

[billres]

Yeah , "extractor " it is , word finding getting a little tough
at times . Broke in two pieces , will install new and put loctite
on it. Thanks for tip.